Pre-Engineered Buildings

MODERN CONSTRUCTION SOLUTION

PRE-ENGINEERED STEEL BUILDINGS

A type of building made of steel structures and manufactured and installed according to architectural and technical drawings already specified. The process of making a finished product (with the combination of quality control and inspection) is through three main stages: design, fabrication and erection at the construction site. The entire steel structures can be produced synchronously and then transported to the construction site in a relatively short time. For a cost-saving project, fast erection, absolute quality control and sustainability, pre-engineered steel buildings are the most optimal choice.

QUALITY

The quality of pre-engineered steel buildings is checked and evaluated to ensure the best quality.

FAST EXECUTION

The production and erection of steel structures take place quickly.

COST SAVING

Pre-engineered steel buildings also help investors save a lot of costs of labor and materials.

AESTHETIC

The aesthetic of pre-engineered buildings is highly appreciated by investors.

ABOUT US

CONTACT

WHY CHOOSE PRE-ENGINEERED STEEL BUILDINGS?

FAST PROGRESS

The steel structure is pre-machined at the factory and only transported to the construction site, erected by link bolts, so the construction time is shortened to 1/3 compared to the traditional concrete construction time, which helps to speed up construction work to put into use.

SUITABLE FOR VARIOUS TYPES OF MATERIALS

Pre-engineered steel buildings are suitable for many types of finishing materials such as Cladding, Wood, Glass, Brick, … to ensure the quality and aesthetics of the project after finishing.

LIGHTER WEIGHT

Lighter weight compared to concrete, it reduces the pressure on the foundation. In addition, with a lightweight structural frame, pre-engineered steel buildings are not affected by seismic.

COST SAVING

The price per square meter can be 25% lower than conventional steel buildings. The site erection cost is low because of faster erection times and easier erection process.

FLEXIBILITY

Pre-engineered steel buildings are flexible in expansion. The components of steel buildings are connected through pre-designed bolts and connectors, so the expansion is flexible and does not take much time and cost.

LARGE CLEAR SPAN

Pre-engineered steel buildings claim to exceed a large span of up to 100m. Pre-engineered steel buildings can be flexibly applied in many constructions, especially commercial centers, exhibition centers, airport terminals, stadiums.

COMPONENT OF PRE-ENGINEERED STEEL

MAIN STRUCTURE

Columns: The most commonly used are H-shaped columns, in addition to a round column used for some special constructions.

Rafter: In factory buildings with pre-engineered steel frames, rafters are created to reach large spans of 30-50m. Rafters are made up of cross-section steel beams or trusses.

Bracing: Including roof bracing, purlin bracing, gable bracing. Its purpose is to increase the connectivity for the parts of the building, ensuring the stability of the entire frame structure during the construction and use of pre-engineered steel frame workshops.

SECONDARY STRUCTURE

The secondary structural system includes: girder beams, purlins, struts. These are cold-rolled mild steel bars of C or Z shape or hollow joist beams.

Beams: the most common are I-shaped beams.
Purlin: There are many types of purlin used to make prefabricated steel buildings. The purlin may be in the form of C, Z or U. The length and height of the purlin depend on the column steps and the load of the building. The usual distance is 1 – 1.4m.

WALL AND CLADDING

Roof and wall cladding: these parts helps covering pre-engineered steel buildings and increase the aesthetics of the building.
Some components of Pre-Engineered building: partial block wall, gutter, wall light, rolling doors, canopy, double sliding doors, Fixed louver, aluminum windows, wall panel, ridge ventilator, gravent.

APPLICATION

As the latest construction trend in the world, pre-engineered steel buildings are increasingly asserting outstanding advantages in many fields:

INDUSTRIAL

Factories, Manufacturing Plant, warehouses, Cold Storage, steel rolling Mill, assembly plants

AGRICULTURAL

Greenhouse, livestock farm, fertilizer factory

COMMERCIAL

Fair – exhibition center, supermarket / hypermarkets, shopping malls, restaurants, commercial complexes, gas stations, etc.

PUBLIC

Hospitals, schools, airports terminal, railway stations

AMUSEMENT PARKS

Sports center, gym, swimming pool

PRE-ENGINEERED STEEL BUILDINGS BRAND

WORLD STEEL GROUP

WORLD STEEL is a leading brand of steel buildings in Viet Nam. We are the first Asian company to achieve the IAS AC472 certificate. This is an American steel structure standard recognized by MBMA (Metal Building Manufacturers Association).

EXPERIENCE

We have years of experience in pre-engineered steel buildings and steel structures.

MODERN

World Steel factory is one of the most modern and large-scale factories.

CONSCIENTIOUSNESS

World Steel is aware of the importance of being dedicated and responsible in the implementation of projects.